Showing 220–230 of 1148 results

The HDMI HDBaseT + 3.5mm, USB-B to A, and RS232 over Cat Extender Box Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution where USB must be extended alongside HDMI video and audio to interactive whiteboards and displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard HDMI cabling.The transmitter extends HDMI and high speed USB 2.0 signals over a single Cat5e, Cat6 or Cat6a network patch cable. Extend 4K HDMI up to 115 feet and 1080p up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI or up to 130 feet using a Cat6a cable.This HDMI HDBaseT Extender is HDCP 2.2 compliant, making sure that the connection between the source and display is secure. One-way analog audio pass through is supported from the transmitter to the receiver. High speed USB 2.0 pass through is supported over HDBaseT up to 230ft for KVM control of devices such as USB cameras, keyboards, mice, etc. With PoH support, the transmitter sends power to both, the transmitter and the receiver, so no additional power adapter is required, allowing for greater flexibility in installations. Support this HDBaseT system that is already deployed in the field by upgrading firmware through the RS232 port.Note: Ensure a solid reliable connection between the 4K HDMI HDBaseT Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors.

The C2G 2-Port VGA Auto Switch is perfect for switching between two source devices connected to a single display. For example, in a learning, sharing and collaborating environment, the VGA Auto Switch allows a document camera and a PC to be connected to a single VGA input on the display. The switch may be set so that the PC is displayed until the document camera is powered on causing an automatic switch that will allow the document camera to be displayed. When the document camera is powered off, the switch will then allow the PC to be displayed. The C2G 2-Port VGA Auto Switch has a small footprint allowing it to be placed in a convenient location for manual operation. No software is required for automatic or manual selection modes. The C2G 2-Port VGA Auto Switch features Extended Display Identification Data (EDID) copy, which ensures that the content from the source devices is sent to the display at the optimal resolution.

Kramer Electronics VS-44H2A AV matrix switcher

Kramer Electronics KRAMER VP-440X 18 4 PRESENTATION SWITCHER/SCALER HDBASET HDMI SIMULTANEOUS OUTPU

Monoprice 39673 AV extender

Monoprice 43624 AV extender AV transmitter & receiver Black

DisplayPort HDBaseT Extender over Cat Receiver (TAA Compliant)The DisplayPort HDBaseT over Cat Extender allows DisplayPort audio/video signals to be extended over a single Cat5e, Cat6, or Cat6a cable up to 300ft at a 1080p resolution. This receiver requires a DisplayPort or HDMI HDBaseT Transmitter for a complete solution. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice power, which allows power to be supplied over the Cat cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display’s capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension.

MANHATTAN/INTELLINET 4K@60HZ 2-PORT HDMI SPLITTER

Kramer Electronics VM-2DH video signal converter 1920 x 1200 pixels

VIVOTEK RX9502 AV extender AV receiver Black