Showing 670–680 of 1181 results

"APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within serverand/or networking racks. Switched outlets to turn outlets on or off remotely. Outlet and PDU level powermetering for power visibility and notification of potential overload. 4-in-1 combination outlets which canbe used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximumoutlet density with 42 outlets in a 2.2"" wide form factor. Outlets on the PDUs are color coded and/orlabeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternatingphase design whereby each of the 3 phases are organized into small outlet groups which alternatefrom top to bottom of the PDU to facilitate better power cord management and promote better loadbalancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an NetworkManagement Card to continue functioning in the event of an AC power loss. No interruption in Networkcommunication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC)which can be replaced without powering down the PDU or connected devices to minimize downtimein the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at fullload ensures reliability and availability even in today's high density deployments. Gigabit ethernet toenhance and standardize network connectivity across all assets in the data center. A second ethernetport (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, orprovide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDUAdvanced to bill based on power usage. In addition, the higher level of accuracy ensures the mostprecise measures for capacity planning and threshold alarm monitoring. Two environmental sensorports allow for optional sensors (sold separately) to be connected. For data center deployments acrossmultiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally tosimplify and standardize deployment."

APC Netshelter Rack Automatic Transfer Switch, 2U, 30A, 208V, 2 L6-30P IN, 1 L6-30R OUT, 50/60Hz

Metered surge protected rPDUs deliver reliable power to critical IT equipment within a rack or cabinet and comes equipped with built-in surge protection and a local power meter displaying real-time power metrics.

Basic surge protected rPDUs deliver reliable power to critical IT equipment within a rack or cabinet and comes equipped with built-in surge protection.

Basic surge protected rPDUs deliver reliable power to critical IT equipment within a rack or cabinet and comes equipped with built-in surge protection.

Network Metered PDUs enable line level power metering in real time. Allowing remote monitoring of the load level, custom notifications and user specified conditions. Each Network Metered PDU provides visibility and reporting of power usage on the PDUs Color LCD screen and to tablets, smart phones, or computers from nearly anywhere.

Network Metered PDUs enable line level power metering in real time. Allowing remote monitoring of the load level, custom notifications and user specified conditions. Each Network Metered PDU provides visibility and reporting of power usage on the PDUs Color LCD screen and to tablets, smart phones, or computers from nearly anywhere.

Compatible with MPR Series raceways

Replace messy wall warts and power strips with a universal power solution for DC powered AV, networking, and security devices. Eliminate wall warts and other power clutter in your AV, networking or security installations with DC Power Distribution, the perfect power solution for build areas with a multitude of devices in varying voltages. With ultimate flexibility built in, these DC Power Distribution solutions provide support and availability for multiple industry standard voltages as well as mounting options allowing the units to be placed within a typical rack unit, small enclosure or wall box. This space-saving solution is intuitive to install with a color-coded screw terminal connector platform that manages the multiple voltage options and easy to identify polarity labeling. Simply streamline the install by allowing leads to be trimmed to length and by reducing design modifications contributing to additional labor costs with DC Power Distribution. Multiple voltage outputs (5V, 12V, 18V, & 24V) supported in a convenient, single box form factor Color-coded screw terminal connectors with industry standard voltages and polarity labeling for easy identification Reliable multi-level protection on both AC input and DC outputs to ensure maximum uptime MOV surge and overload protection on the AC input Individual redundancy built in with auto-resetting PTC overload protection on each individual output 5V USB ports provided to conveniently power compatible products 125W DC 1 RU system supports a wide range of applications from small systems in tight spaces to enclosures in large distributed systems LED indicator lights showing activity on each output and alerting maximum capacity on each voltage bank Leads trimmed to suitable length leaves less cable to manage, enhancing aesthetics and increasing airflow Hardware kit includes flexible mounting hardware, color-coded screw terminal connectors to connect devices, and a 6ft IEC power cord

Combines power distribution and lighting in a one space package