Showing 220–230 of 954 results

APC Smart UPS 3000VA LCD RM 2U 120V with 12FT CORDReliable network power protection designed for deployment in retail and open access environments.Includes : CD with software, Documentation CD, Installation guide, Rack mounting hardware, Rack Mounting support rails, Smart UPS signalling RS-232 cable, USB cable- Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.- Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.- Audible alarmsProvides notification of changing utility power and UPS power conditions- Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.- Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance- Boost and Trim Automatic Voltage Regulation (AVR)Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.- Disconnected battery notificationWarns when a battery is not available to provide backup power.- Energy meterProvides actual kilowatt hours of usage for energy conscious users.- Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.- Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.- LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.- Network manageableProvides remote power management of the UPS over the network.- Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).- Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.- Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.- Sequenced network shutdown and rebootCustomize network shutdown and reboot sequence of connected servers and UPSs.- Serial connectivityUse any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.- Sine wave outputEliminates humming and heat generated when powering tubelights and fans.- Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.- StruxureWare Data Center Expert compatibleEnables centralized management via StruxureWare Data Center Expert.- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.- USB connectivityProvides management of the UPS via a USB port (not available on all models).- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Serviceability- Easy to installInnovative design allows for fast, easy installation by almost anybody.- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced- Technical supportOur experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.Availability- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.- Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.- Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.- Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Manageability- USB connectivityProvides management of the UPS via a USB port (not available on all models).- SmartSlotCustomize UPS capabilities with management cards.- Serial connectivityProvides management of the UPS via a serial port.- LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.

APC SMX750CNC

Description: APC Basic Rack PDU, Input : 120, 208, 230V , Input Connection Type : IEC-320 C20 , Cord Length : 8.2 feet ( 2.5 meters ) , Output : 120, 208, 230V , Output Connections : (10)IEC 320 C13, (2)IEC 320 C19 Features: 19 inch Rack-Mountable, Low Cost Power Distribution, Vertical Mounting Capabilities Includes: Cord Retention Clips, Rack Mounting Brackets, User Manual Output Voltage(s) (main only) - 120, 208, 230 V Maximum Total Current Draw per Phase - 16 A Output Connections - (10)IEC 320 C13; (2)IEC 320 C19 Always on Outlets - 12 Overload Protection Input: Nominal input voltage - 120, 208, 230 Input frequency (Hz) - 50/60 Hz Input Connection Type - IEC-320 C20 Cord Length 8.2 feet ( 2.5 meters ) Acceptable Input Voltage - 90-250 VAC Maximum Line Current per phase - 16.0 A Maximum Input Current per phase - 16.0 A Load Capacity - 3680

Description - APC Basic Rack PDU, Input : 208, 230V , Input Connection Type : IEC-320 C14 , Cord Length : 6.5 feet ( 1.98 meters ) , Output : 208, 230V , Output Connections : (15)IEC 320 C13 Features - Low Cost Power Distribution, Toolless Mounting Capabilities, Vertical Mounting Capabilities Includes - Installation Guide, Rack Mounting Brackets, Toolless Mounting Kit Output: Output Voltage(s) (main only) - 208, 230 V Maximum Total Current Draw per Phase - 10 A Output Connections - (15)IEC 320 C13 Input: Nominal input voltage - 208, 230 Input frequency (Hz) - 50/60 Hz Input Connection Type - IEC-320 C14 Cord Length - 6.5 feet ( 1.98 meters ) Acceptable Input Voltage - 200-240 VAC Maximum Input Current per phase - 10.0 A Load Capacity - 2300

APC APCRBC130 UPS battery Sealed Lead Acid (VRLA) 12 V 9 Ah

APC Smart-UPS X 3000VA Short Depth Tower/Rack Convertible LCD 208VIntelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.Includes : CD with software , Documentation CD , Rack Mounting Brackets , Smart UPS signalling RS-232 cable , USB cable , User ManualAvailability- Disconnected battery notificationWarns when a battery is not available to provide backup power.- Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.- Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.- Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.- Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Manageability- USB connectivityProvides management of the UPS via a USB port (not available on all models).- Disconnected battery notificationWarns when a battery is not available to provide backup power.- LED status indicatorsQuickly understand unit and power status with visual indicators.- Serial connectivityProvides management of the UPS via a serial port.- Audible alarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.- Network manageableProvides remote power management of the UPS over the network.Safety- Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Marketing Features- Smarter productivity with ability to tailor to your specific application needsIntuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.- Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.- Avoids costly power problems by keeping your IT equipment and data safe and available. Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems- Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery managementPatented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.- Save time with easy and convenient remote accessibilityNetwork manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.Serviceability- Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance- Resettable circuit breakersEnables a quick recovery from overload events.- Predictive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.- User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)- Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedAdaptability- Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.- Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Includes: Documentation CD, Installation guide, Warranty card

"APC Smart-UPS. Battery technology: Sealed Lead Acid (VRLA), Battery voltage: 48 V, Number of batteries included: 2 pc(s). Weight: 63.1 lbs (28.6 kg), Width: 17"" (432 mm), Height: 3.5"" (89 mm). Package width: 23.2"" (589 mm), Package height: 9.69"" (246 mm), Package depth: 24.4"" (620 mm)"

APC Smart-UPS 750VA LCD RM 2U 120V with SmartConnect Port and Network Card

APC Smart-UPS Ultra Lithium-Ion Battery Pack 1UAPC Smart-UPS Ultra Lithium-ion 1U External Battery Pack for extended runtime on Smart-UPS Ultra 3kW systems. Up to 10 external batteries can be connected.