Showing 40–50 of 70 results

This stainless steel wall plate is designed with a plastic spacer that makes the keystone jack appear flush to the face. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements for voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, so that you can enjoy a highly adaptable system. A space is even provided for identifying stations; simply write onto the white insert with a fine tip permanent marker. Compatible with NEMA standard openings and boxes, this wall plate will mount to any electrical or surface mount box, and work with any keystone jacks or keystone inserts.

Feed-through coupler for one USB Type A male cable connector and one USB Type B male cable connector Our keystone snap-in modules provide a full range of solutions for voice, home networking, home office, audio/video and more. With the wide selection of snap-in modules, you can custom-configure your keystone wall plates and patch panels for greater control and more flexibility. Use this coupler for one USB Type A male cable connector and one USB Type B male cable connector; just snap it into patch panels, compatible wall plates and surface boxes.

90° 110/KRONE IDC punchdown; T568A/B Designed for superior performance, this keystone jack will work with Cables To Go wall plates and surface boxes or any standard keystone and angled multimedia wall plate or patch panel. Available in 9 colors to match housing or allow color-coded port designation in compliance with TIA-606 requirements. Each keystone jack includes 110-type IDC straight-back termination with strain relief caps, and comes standard with 50 µinch gold plating on the jack contacts.

90° 110/KRONE IDC punchdown; T568A/BDesigned for superior performance, this keystone jack will work with Cables To Go wall plates and surface boxes or any standard keystone and angled multimedia wall plate or patch panel. Available in 9 colors to match housing or allow color-coded port designation in compliance with TIA-606 requirements. Each keystone jack includes 110-type IDC straight-back termination with strain relief caps, and comes standard with 50 µinch gold plating on the jack contacts.

Our flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, giving you a highly adaptable system. Write-on designation labels with holders are provided for identifying different systems or stations.

Our flush mount Keystone Wallplates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic, etc. The inserts are a snap to install and remove, giving you a highly adaptable system. Write-on designation labels with holders are provided for identifying different systems or stations.

Cables To Go's Category 5e Keystone Jacks are designed for superior performance that meets or exceeds industry standard TIA/EIA 568-A-5 requirements. The keystone jack will balance signal transmission of insertion loss and crosstalk from 1 to 100 MHz. Jacks are available in 9 colors to match housing or allow color- coded designation port in compliance with TIA-606 requirements. The jacks are designed to work in conjunction with the Cables To Go wallplates and surface boxes or any standard keystone and angled multimedia wallplate or patch panel. Each keystone jack includes 110-type IDC straight-back termination with strain relief caps, and comes standard with 50µ inch gold plating on the jack contacts. - Type: Panel-type Unshielded RJ-45 (8P8C). - Termination: 110/KRONE IDC vertical punchdown for 22-26 AWG solid wires. - Supports: Dual T568A & T568B wiring compatible with Category 5 enhanced requirement. - Includes two plastic strain relief caps for IDC connector and 3 color coded designation dust covers with-voice, data and Cat5e icons. - Use: Any unloaded keystone wallplate or patch panel. - Complies with FCC Part 68.

180º 110/KRONE IDC punchdown Cables To Go's Category 6 Keystone Jacks are designed for superior performance that meets or exceeds industry standard Category 6/Class E according to TIA/EIA 568B 2.1 and ISO/IEC 11801. The keystone jack will balance signal transmission of insertion loss and crosstalk from 1 to 250 MHz. The jacks are designed to work in conjunction with the Cables To Go wallplates and surface boxes or any standard keystone and angled multimedia wallplate or patch panel. Each keystone jack includes 110-type IDC termination with strain relief caps, and comes standard with 50µ inch gold plating on the jack contacts.

Feed-thru coupler for video/catv applications Keystone Snap-in Modules from Cables To Go provide a full range of solutions for voice, home networking, home office, audio, video and more. With the wide selection of snap-in modules, keystone wallplates and patch panels can be custom-configured to give you greater control and flexibility.

Use with a Multi-Format Runner for projectors and any display requiring an HD15, 3.5mm audio and RCA audio/video connectionRapidRun® is designed to be the standard for in-wall audio/video installations. Using pre-terminated Break-away flying leads and wall plates with an in-wall runner ensures flexible, efficient, high quality connections for all types of equipment, with no field terminations.RapidRun Multi-Format represents the most significant upgrade to the RapidRun cabling solution to date. With enhanced engineering that includes individually shielded pairs and an isolated ground for audio lines, this solution meets the rigorous demand for applications in which multiple audio/video devices are run over a single cable.With the advent of the “Analog Sunset” in 2014, digital solutions are being developed to expand the RapidRun Multi-Format line. These solutions make this innovative system ideal for environments where analog equipment will eventually be upgraded to digital.Ideal for educational and institutional installations, this wall plate receives PC video, 3.5mm stereo audio and RCA composite audio/video from one cable. Constructed from aluminum for durability, this wall plate has a locking connector that enables the integrator to save valuable space inside the surface mount or electrical box that typically is already packed with cables. The included keystone bezels will work with most brands of keystone inserts including Leviton®, L-com®, NetKey®, ADC Krone, HellermannTyton, and Allen Tel.Please note: Each complete RapidRun Multi-Format solution requires a break-away flying lead or wall plate to terminat each end of the runner cable. Each runner requires (2) break-away flying leads, (2) wall plates, OR (1) break-away flying lead and (1) wall plate.- Color code: Orange- For use with Multi-Format Orange runners- Delivers crisp video and high-fidelity audio from source device to display- Integrates all technology in the room with a single cabling system – laptops, projectors, DVD players, interactive whiteboards and more- Fits into a standard double gang J-box