Showing 40–50 of 67 results

Tripp Lite's N784-001-ST, 10/100 Multimode Media Converter, is an economical way to extend the distance (up to 2Km) of network nodes by converting Cat5/6 UTP cables to Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically as well. Dip switches allow half or full duplex operation on the fiber port. Power supplied by either AC-DC adapter, or USB connection (switch selectable). Tripp Lite- Convert UTP Ethernet to Fiber- Supports Auto MDI/MDI-X- Half- or Full-Duplex Operation- 10/100 Auto-sensing- Connect 10BaseT/100BaseT UTP Ethernet to 100BaseFX Fiber Ethernet- Auto MDI/MDI-X- UTP port auto-senses network speed - Switch selectable half or full duplex operation on the fiber port- Fiber lengths up to 2Km- 2 Power Choices - AC-DC Adapter or USB- 5 LED Function lights - Uses 62.5/125 or 50/125 Multimode cable- 3.75L x 2.75W x 1H- Wavelength: 1310nm - Supports Link Fault Pass-through (LFP) for easy tracing of network link failures

"Tripp Lite's N785-001-SC 10/100/1000 Gigabit Media Converter is an economical way to extend the distance ( up to 2Km ) of network nodes by converting Cat5/6 UTP cables to Fiber Optic. With advanced features such as selectable half or full duplex operation on the fiber port, 1310 nm wavelength, automatic MDI/MDI-X configuration and link fault pass-through, the N785-001-SC supplies superior signal quality and gives you ultimate network control. For extra flexibility, the converter can be powered either by an AC adapter or USB port. The N785-001-SC is compatible with both 62.5/125 and 50/125 multimode fiber cable.- Connect 10BaseT/100BaseT /1,000BaseT UTP Ethernet to 1000BaseFX Fiber Ethernet- Auto MDI/MDI-X- UTP port auto-senses network speed- Fiber lengths up to 2Km- 6 LED Function lights- Uses 62.5/125 or 50/125 Multimode cable- 3.75""L x 2.75""W x 1""H- Wavelength: 1310nm- RoHS Compliant"

Tripp Lite's N785-001-SC-MM 10/100/1000 to Multimode Media Converter ( RJ45 to SC ) is an economical way to extend the distance of network nodes up to 550 Meters by converting Cat5e UTP cables to Multimode Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically. Auto-detects half or full duplex operation on the fiber port. Power supplied by small form factor AC adapter.- Extends a Gigabit Ethernet signal up to 550M over Multimode Fiber Optic Cable- Auto detects Full/Half Duplex Transfer Mode- 10/100/1000 UTP to Multimode Fiber converter - Up to 550M (1800-ft.) range - Auto-detects Full / Half Duplex Transfer Mode - Auto Negotiation MDI / MDI-X - 6 performance monitoring LEDs - 850nm wavelength - Small, compact design

The NG8 8-Port 10/100/1000 Mbps Desktop Gigabit Ethernet Unmanaged Switch adds 10/100/1000 Mbps Ethernet capacity to your home office, small office, workgroup or creative production environment. Share large bandwidth-intensive files, such as CAD drawings and videos, at Gigabit speeds, improving efficiency and cutting costly downtime.This desktop switch features eight twisted-pair RJ45 Gigabit Ethernet ports that support auto-negotiable 10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for convenient plug-and-play capability. No configuration is required, so you can have your Gigabit network up and running immediately. Easy-to-read LEDs indicate connection and activity status for each port. IEEE 802.3x flow control allows smooth transmission of large files.The NG8 supports IEEE 802.3az Energy Efficient Ethernet standards by putting unused ports into a low-power state without interrupting network connections. It consumes very little input power—just a single watt. The detachable five-foot input cord with NEMA 1-15P plug connects to a protected UPS, generator or mains input AC source. The heavy-duty metal housing includes keyhole tabs for optional wall-mounting. Unmanaged Network Switch for Home/Small Offices or Workgroups- 8 twisted-pair RJ45 Gigabit Ethernet ports- Auto-negotiable 10/100/1000 Mbps- Automatic MDI/MDIX cross-over detection- 16 Gbps switching capacity (2 Gbps per port with full duplex)- Easy-to-read LEDs indicate connection and activity status for each port- Supports 9k jumbo frames- Supports MAC address auto-learning and auto-aging- Supports 802.3x flow control (full duplex) and back pressure (half duplex)Compliant with IEEE 802.3az Energy Efficient Ethernet Standards- Automatically shifts unused ports to low-power state without interrupting network connection- Consumes very little input power—just 1W- Also meets IEEE 802.3ab, 802.3i, 802.3u and 802.3 standardsHeavy-Duty Metal Housing- Fanless design for silent operation- Detachable 5 ft. AC power cord with NEMA 1-15P plug- Plug-and-play—no configuration necessary- Keyhole tabs for optional wall-mounting

Tripp Lite's N784-001-SC-MM 10/100 to Multimode Media Converter ( RJ45 to SC ) is an economical way to extend the distance of network nodes up to 550 Meters by converting Cat5e UTP cables to Multimode Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically. Auto-detects half or full duplex operation on the fiber port. Power supplied by small form factor AC adapter.- Extends a 100Mb Ethernet signal up to 550M over Multimode Fiber Optic Cable- 10/100 UTP to SC Multimode Fiber converter - Up to 550M (1800-ft.) range- Auto-detects Full / Half Duplex Transfer Mode- Auto Negotiation MDI / MDI-X - 6 performance monitoring LEDs - 850nm wavelength- Small, compact design

The NG5P 5-Port 10/100/1000 Mbps Desktop Gigabit Ethernet Unmanaged Switch adds 10/100/1000 Mbps Ethernet capacity to your home office, small office, workgroup or creative production environment. Share large bandwidth-intensive files, such as CAD drawings and videos, at Gigabit speeds, improving efficiency and cutting costly downtime.This desktop switch features five twisted-pair RJ45 Gigabit Ethernet ports that support auto-negotiable 10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for convenient plug-and-play capability. No configuration is required, so you can have your Gigabit network up and running immediately. Easy-to-read LEDs indicate connection and activity status for each port. IEEE 802.3x flow control allows smooth transmission of large files.The NG5P supports IEEE 802.3az Energy Efficient Ethernet standards by putting unused ports into a low-power state without interrupting network connections. It consumes very little input power—just a single watt. The detachable five-foot input cord with NEMA 1-15P plug connects to a protected UPS, generator or mains input AC source. Unmanaged Network Switch for Home/Small Offices or Workgroups- 5 twisted-pair RJ45 Gigabit Ethernet ports- Auto-negotiable 10/100/1000 Mbps- Automatic MDI/MDIX cross-over detection- 10 Gbps switching capacity (2 Gbps per port with full duplex)- Easy-to-read LEDs indicate connection and activity status for each port- Supports 9k jumbo frames- Supports MAC address auto-learning and auto-aging- Supports 802.3x flow control (full duplex) and back pressure (half duplex)Compliant with IEEE 802.3az Energy Efficient Ethernet Standards- Automatically shifts unused ports to low-power state without interrupting network connection- Consumes very little input power—just 1W- Also meets IEEE 802.3ab, 802.3i, 802.3u and 802.3 standardsDurable Housing- Fanless design for silent operation- Detachable 5 ft. AC power cord with NEMA 1-15P plug- Plug-and-play—no configuration necessary

The NG8P 8-Port 10/100/1000 Mbps Desktop Gigabit Ethernet Unmanaged Switch adds 10/100/1000 Mbps Ethernet capacity to your home office, small office, workgroup or creative production environment. Share large bandwidth-intensive files, such as CAD drawings and videos, at Gigabit speeds, improving efficiency and cutting costly downtime.This desktop switch features eight twisted-pair RJ45 Gigabit Ethernet ports that support auto-negotiable 10/100/1000 Mbps and auto MDI/MDIX cross-over detection functions for convenient plug-and-play capability. No configuration is required, so you can have your Gigabit network up and running immediately. Easy-to-read LEDs indicate connection and activity status for each port. IEEE 802.3x flow control allows smooth transmission of large files.The NG8P supports IEEE 802.3az Energy Efficient Ethernet standards by putting unused ports into a low-power state without interrupting network connections. It consumes very little input power—just a single watt. The detachable five-foot input cord with NEMA 1-15P plug connects to a protected UPS, generator or mains input AC source. Unmanaged Network Switch for Home/Small Offices or Workgroups- 8 twisted-pair RJ45 Gigabit Ethernet ports- Auto-negotiable 10/100/1000 Mbps- Automatic MDI/MDIX cross-over detection- 16 Gbps switching capacity (2 Gbps per port with full duplex)- Easy-to-read LEDs indicate connection and activity status for each port- Supports 9k jumbo frames- Supports MAC address auto-learning and auto-aging- Supports 802.3x flow control (full duplex) and back pressure (half duplex)Compliant with IEEE 802.3az Energy Efficient Ethernet Standards- Automatically shifts unused ports to low-power state without interrupting network connection- Consumes very little input power—just 1W- Also meets IEEE 802.3ab, 802.3i, 802.3u and 802.3 standardsDurable Housing- Fanless design for silent operation- Detachable 5 ft. AC power cord with NEMA 1-15P plug- Plug-and-play—no configuration necessary

Tripp Lite's N784-001-SC-15, 10/100 to Singlemode Media Converter ( RJ45 to SC ), is an economical way to extend the distance ( up to 15kM ) of network nodes by converting Cat5e UTP cables to Singlemode Fiber Optic. The Media Converter features automatic MDI/MDI-X configuration, and the UTP port senses the network speed automatically as well. Auto-detects half or full duplex operation on the fiber port. Power supplied by small form factor AC adapter.- Extends a 100Mb Ethernet signal up to 15kM over Singlemode Fiber Optic Cable- Auto detects Full/Half Duplex Transfer Mode- 10/100 UTP to Singlemode Fiber converter- Up to 15kM ( 9 mile ) range- Auto Negotiation MDI / MDI-X - 6 performance monitoring LEDs - 1310nm wavelength- Small, compact design

Tripp Lite NGS24C2. Switch type: Managed, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24. Switching capacity: 52 Gbit/s. Rack mounting, Form factor: 1U

Tripp Lite NGS8C2. Switch type: Managed, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 8. MAC address table: 8000 entries, Switching capacity: 20 Gbit/s. Rack mounting, Form factor: 1U