Showing 10–18 of 18 results

HDMI Port Lock Helps Prevent Accidental Disconnection and Expensive DowntimeHaving a cable come loose accidentally can mean the loss of an audio/video signal and costly downtime. The P568-000-LOCK helps you avoid interruptions in your digital signage system by maintaining a secure link without failure. A locking HDMI connection is also invaluable when moving equipment in a rack or removing equipment from tight areas, ensuring the cable always stays connected.Easy to Install in Just a Few MinutesThis HDMI lock works with any HDMI cable and any device with a fixing or locking screw space above or below the HDMI port. If the device has no screw in the fixing space, one is included. Just secure the included nylon cable tie to the fixing space with the screw, and insert your HDMI cable into the cable tie clamp, pushing the clamp as close to the connector as possible. Then, plug the cable into the device’s HDMI port, and insert the cable tie into the clamp, removing all slack, so the HDMI plug cannot come loose. Removing the cable tie from the clamp allows you to unplug the cable.Lifetime WarrantyThe P568-000-LOCK is backed by a lifetime warranty, ensuring reliability and performance.

Key for Universal RJ45 Plug Lock and Locking Insert Allows for Easy and Quick UseThe N2LOCK-KEY-RD provides an easy way to unlock a connection between N2LOCK-010-YW RJ45 plug lock or N2LPLUG-010-YW RJ45 locking insert and an RJ45 port. Just insert the key into either the plug lock or locking insert for instant disconnection in seconds with no damage to the port’s patch panel, wall plate or network switch. This package includes two keys.

RJ45 Locking Insert Helps Prevent Accidental or Unwanted Cable ConnectionsThe N2LPLUG-010-YW lets you maintain strict control over your patch panel, wall plate or network switch’s RJ45 ports. The insert locks into an RJ45 port, preventing those without proper access from connecting cables. Not only does this protect data and deter tampering, but it also helps prevent a network connection from weakening due to too many ports in service. This package includes 10 yellow RJ45 locking inserts.Easy to Install or Remove in Just a Few SecondsThis RJ45 insert secures a lock to most types of RJ45 jacks in a patch panel, wall plate or switch to prevent unauthorized connection of a patch cord or other compatible network equipment. Just connect the N2LPLUG-010-YW to the panel or switch’s RJ45 port for a secure lock. You’ll hear a click to confirm the insert has locked into place. To remove the insert, use the N2LOCK-KEY-RD security key (sold separately).Color-Coded to Avoid Misidentification That Can Lead to a Costly Dropped SignalYellow color-coding allows easy, fast identification in a crowded rack or patch panel and helps prevent the insert from becoming inadvertently removed. The insert’s compact design doesn’t interfere with adjacent RJ45 jacks, even in high-density applications.

PLC13BL BLUE color plug-lock inserts prevent accidental disconnection of C14 plug-in power cords from C13 output receptacles. IEC 60320 plug-in electrical cords are frequently loose-fitting and are often subject to accidental disconnection during routine network maintenance. To prevent critical equipment plugs from getting knocked loose, place a plug-lock insert over any C14 input cord and connect it to any C13 outlet. The insert strengthens the connection of the plug to the outlet, keeping critical equipment plugged in and running during routine rack access and maintenance.Plug-lock inserts provide a no-clutter alternative to common zip-tie cord retention schemes and a low-cost answer to expensive proprietary locking plug and outlet hardware. PLC13BL plug-lock inserts ship in packages of 100.

The SRDVRLB 5U Security DVR Lockbox Enclosure is an all-in-one solution for securely storing and cooling your security digital video recorder (DVR) to protect it from damage, tampering or theft. It’s ideal for network closets, retail outlets, warehouses, offices, classrooms and other locations where you need a DVR to be securely protected from unauthorized access. Constructed from heavy-duty steel in a durable black powder-coat finish, the SRDVRLB has a maximum load capacity of 27 kgs.To ensure your valuable DVR data stays safe and secure, the front door locks with the included keys. The edges of the door wrap around the left and right sides of the enclosure and the removable top panel to ensure the DVR’s safety. The right side panel is ventilated to allow air to flow freely through the cabinet. The left side panel includes a preinstalled cooling fan with washable air filter that blows cool air onto the DVR and prevents dust and airborne particles from entering the enclosure. Convenient rear and bottom ports with removable covers allow easy cable routing through the enclosure.The SRDVRLB comes fully assembled and ready to mount on a wall, floor or tabletop. Installing a security DVR within the enclosure is easy with its removable top panel, square mounting holes and numbered rack spaces. The front and rear mounting rails adjust in 1-inch increments to accommodate equipment from 1 to 16 inches deep.Saves Valuable Workspace● Perfect for network closets, retail outlets, warehouses, offices, classrooms and other locations where you need a security DVR to be protected from unauthorized access● Houses a rack or non-rack security DVR in 5U of rack space● Has maximum load capacity of 27 kgsKeeps Important Equipment Secure● Lockable front door overlaps side panels and removable top to protect DVR against damage, tampering or theft● Preinstalled cooling fan with washable air filter blows cold air and prevents dust from entering the enclosure● Vented side panel allows general airflow that keeps DVR cool● Convenient ports with removable covers allow cable routing through bottom and rearEasy Enclosure and Equipment Installation● Ships fully assembled for quick installation on a wall, floor or tabletop● Mounting plate’s holes spaced 16 in. apart to accommodate standard wall stud placement● Removable top panel allows easy access to DVR and cables● Front and rear mounting rails adjust in 1 in. increments from 1 to 16 in. deep● Rails adjust easily—unscrew them, slide them to desired depth, and screw them back in● Rails support square-hole mounting● Rack spaces numbered for easy referenceMeets Payment Card Industry Standards● Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance● Maximum load capacity of 27 kgs● Vertical mounting rails adjust from 1 to 16 in. deep● Locks securely to help prevent damage, tampering or theft● Preinstalled cooling fan with filter promotes ample airflow● Fully assembled and ready to mount to wall, floor or tablePackage Includes● SRDVRLB 5U Security DVR Lockbox Enclosure● (20) M6 screws● (20) M6 cage nuts● (20) M6 cup washers● (6) 10/32 screws● (6) 10/32 nuts● (2) Keys● Owner’s manual

PLC19RD RED color plug-lock inserts prevent accidental disconnection of C20 plug-in power cords from C19 output receptacles. IEC 60320 plug-in electrical cords are frequently loose-fitting and are often subject to accidental disconnection during routine network maintenance. To prevent critical equipment plugs from getting knocked loose, place a plug-lock insert over any C20 input cord and connect it to any C19 outlet. The insert strengthens the connection of the plug to the outlet, keeping critical equipment plugged in and running during routine rack access and maintenance. Plug-lock inserts provide a no-clutter alternative to common zip-tie cord retention schemes and a low-cost answer to expensive proprietary locking plug and outlet hardware. PLC19RD plug-lock inserts ship in packages of 100.

PLC19BL BLUE color plug-lock inserts prevent accidental disconnection of C20 plug-in power cords from C19 output receptacles. IEC 60320 plug-in electrical cords are frequently loose-fitting and are often subject to accidental disconnection during routine network maintenance. To prevent critical equipment plugs from getting knocked loose, place a plug-lock insert over any C20 input cord and connect it to any C19 outlet. The insert strengthens the connection of the plug to the outlet, keeping critical equipment plugged in and running during routine rack access and maintenance. Plug-lock inserts provide a no-clutter alternative to common zip-tie cord retention schemes and a low-cost answer to expensive proprietary locking plug and outlet hardware. PLC19BL plug-lock inserts ship in packages of 100.

PLC19BK BLACK color plug-lock inserts prevent accidental disconnection of C20 plug-in power cords from C19 output receptacles. IEC 60320 plug-in electrical cords are frequently loose-fitting and are often subject to accidental disconnection during routine network maintenance. To prevent critical equipment plugs from getting knocked loose, place a plug-lock insert over any C20 input cord and connect it to any C19 outlet. The insert strengthens the connection of the plug to the outlet, keeping critical equipment plugged in and running during routine rack access and maintenance. Plug-lock inserts provide a no-clutter alternative to common zip-tie cord retention schemes and a low-cost answer to expensive proprietary locking plug and outlet hardware. PLC19BK plug-lock inserts ship in packages of 100.