Showing 80–90 of 647 results

Use first-generation Thunderbolt and Thunderbolt 2 devices with your new Thunderbolt 3 computerWith this adapter, you can connect Windows and Mac based Thunderbolt™ 3 computers to older Thunderbolt devices, such as external hard drives, Thunderbolt displays, and older Thunderbolt capable Mac computers.Because this adapter is backward compatible, you can connect to first-generation Thunderbolt devices at 10Gbps speed. With Thunderbolt 2 devices, you can connect at 20Gbps. The adapter satisfies all requirements for bi-directional data transfers and simultaneous power for bus-powered devices.The TBT3TBTADAP is backed by a 2-year warranty for guaranteed reliability.This adapter is not compatible with Thunderbolt 4 computersYour computer's Thunderbolt 3 ports might not function properly until you update one or more of the following on your computer:• BIOS• Thunderbolt firmware• Thunderbolt 3 controller drivers• Thunderbolt 3 softwareThe required updates will vary depending on your computer.For an up-to-date list of affected computers and instructions, visit http://thunderbolttechnology.net/updates . If your manufacturer isn't listed on the Thunderbolt website, contact your manufacturer.The StarTech.com Advantage

Ideal for IT Pros Who Need a Connection Between Computer and Cisco Console DeviceThis rollover cable is designed for consumers or IT professionals who want a reliable connection between their computer or laptop's USB-A port and a Cisco modem, router, firewall, switch or other serial-based Cisco device with a console port. The cable works with both older and new Cisco models, supporting data transfer rates up to 250 Kbps. Top-Quality Construction for Top-of-the-Line PerformanceNo extra software or external power is required to use this 6-ft. (1.83 m) cable. Premium double shielding eliminates crosstalk and reduce EMI/RFI line noise that can disturb your electronics and inflict hardware damage or data loss. The U009-006-RJ45-X is compatible with Windows (up to 11), Mac (up to 10.12) and Linux (up to Redhat 9.0) operating systems.

Digi Edgeport/1 USB-to-Serial Adapter RS-232 White

The P134-000-VGA-V2 DisplayPort 1.2 to VGA Active Compact Adapter allows you to connect a computer with a DisplayPort connection to a VGA monitor. DisplayPort v1.2 doubles the previous version bandwidth of 8.64 Gbps to 17.28 Gbps in High Bit Rate (HBR2) mode, which allows increased resolutions, higher refresh rates and greater color depth. Fully molded one-piece design ensures longer life. Unlike passive adapters, active adapters convert both Single-Mode and Dual Mode (DP++) DisplayPort output. It is ideal for use with graphics cards, such as AMD Eyefinity, that do not output Dual Mode (DP++) signals.

Use this audio adapter cable to add 3.5mm audio output to a USB-C deviceConnect wired headphones or earphones to a USB Type-C-enabled device and enjoy high-fidelity audio output with this USB-C to 3.5mm audio adapter. The built-in 32-bit DAC supports stereo sound and microphone functionality via the TRRS jack for clear and immersive audio.Superior Sound QualityExperience excellent sound quality supporting audio ranges from 44.1 to 384kHz and 16, 24, and 32-bit sample rates, delivering a 105dBA signal-to-noise ratio for crisp and detailed output. The stereo ADC features a 94dB SNR for microphone input, with 48kHz and 16-bit sampling, all powered by the Realtek ALC4030U chipset.Wide CompatibilityThis versatile aux audio adapter is universally compatible with USB-C and Thunderbolt devices, including Windows, macOS, and Linux computers, as well as phones and tablets running iOS or Android. It supports wired headphones and headsets (including models with in-line controls), making it an ideal solution for using existing audio gear and eliminating the need for Bluetooth audio solutions.Sleek and Portable DesignThe compact, sleek adapter measures just 5 inches (127mm) and features a flexible and durable TPE jacket with a soft-touch finish. Use this adapter cable on the go or at a workstation for audio playback, recording, or calls.The StarTech.com Advantage

Connect a DB9 enabled control unit to a 3.5mm enabled device for RS-232 based controlThis serial cable features male DB-9 and 3.5mm connectors. It enables remote serial RS232 calibration of TVs, projectors, and digital signage devices that feature a 3.5mm audio jack.High Quality ConstructionThe aluminum-mylar cable shielding and metal shell connectors mitigate EMI. The molded PVC connectors with strain reliefs and PVC cable jacket prevent damage caused by strain and/or abrasion.Secure the DB-9 connector by tightening the integrated thumbscrews. These connector screw locks prevent accidental disconnection which could lead to data loss/corruption.DB9 Serial to 3.5mm PinoutDB9 Pin 3 to 3.5mm TipDB9 Pin 2 to 3.5mm RingDB9 Pin 5 to 3.5mm SleeveThis product is backed for life, including free lifetime 24/5 multi-lingual technical assistance.The StarTech.com Advantage

The DVI-to-VGA Adapter from Dell is designed for Dell™ Systems. This adapter converts digital DVI output designed for digital flat panels to standard analog VGA™ output for analog CRT monitors or flat panels. It is specifically designed for Wildcat II 5110 Graphics Card. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.

The DVIVGAMFBK DVI-I to VGA Adapter (M/F) is used to convert a DVI Male connector to a VGA female connector.The DVI to VGA adapter is constructed of high quality materials to ensure dependability, and is backed by StarTech.com's lifetime warranty.Please Note: This product is intended for connections between DVI-I and VGA devices. If your device uses a DVI-D connector, please refer StarTech.com's DVI to VGA Converter DVI2VGACON or DVI2VGAEThe StarTech.com Advantage- Backed by StarTech.com's lifetime warranty- Cost-effective solution for connecting an analog Flat Panel Display to a PC or Mac® computer with DVI-I output

Connects a USB-C Device to Your Computer or Laptop’s USB-A PortThe U329-000 lets you connect a device with USB-C capabilities, such as a smartphone, tablet or hard drive, to the USB-A port on your PC, laptop or USB hub. The palm-sized adapter fits to the end of a USB-C cable, giving you maximum flexibility and more opportunities to share data or charge your phone using a USB-A laptop or wall charger. Note: This adapter does not support video.Transfers Data at Fast USB 3.2 Gen 1 SpeedsThis USB adapter supports USB 3.2 Gen 1 data transfer speeds up to 5 Gbps, which is 10 times faster than USB 2.0. It also produces up to 0.9A for charging and powering mobile devices. The U329-000 is backward compatible with previous USB generations, so you can continue using older devices while getting high-speed performance from new devices.Ready to Use Right Out of the PackageThe plug-and-play USB 3.2 Gen 1 adapter is specifically designed to accept USB-C and Thunderbolt 3 plugs from a wide variety of cables, hubs, hard drives, adapters and other compatible devices. It requires no software or external power. It is small enough to carry in your pocket, purse, briefcase or laptop bag, so you’ll always be ready to connect wherever you are.