Showing 2190–2200 of 9856 results

"The tripod attaches to the RAM-202 around the 2.5"" diameter base. The legs are connected by screws that fit through the holes on the RAM-202. The wing nuts on the end of the screw can be tightened by hand."

"The RAM-101-RYM1 consists of (2 quantity) 2.5"" diameter round bases that contains the universal AMPS hole pattern and standard length double socket arm. Included are (3 quantity) (#8-32 x 3/4"" PH PD Mach Screws) and (3 quantity) (#8-32 SS Nylock Nuts) that will connect the RAM-101-RYM1 to the bottom of all Raymarine Dragonfly Sonar/GPS devices. The mount is designed with a RAM 1.5"" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. This is a drill-down mounting solution."

"The RAM-101U-B-235 consists of a short double socket arm, one round 2.5"" diameter round base with the universal AMPS hole pattern and stainless steel double u-bolt base that will fit pipes from 1"" to 1.25"" in diameter. Designed into the mount is a 1.5"" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles."

"The RAM-107BU is a marine grade aluminum base with 1.5"" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices."

RAM Mounts RAM-109H-3U mounting kit

"The RAM RAM-109VS-4U consists of a single swing arm mount with 1.5"" socket, 6"" long straight swing arm that is mounted on a vertical surface base. The connection between the swing arm and the base is a bolt pivot point. The open socket end will accept mounting bases with a RAM 1.5"" diameter ball, enabling a versatile RAM ball and socket system. The bolt pivoting point allows a complete 360 degree rotation and the ball and socket system allows a 180 degree vertical pivot with a 360 degree rotation."

"The RAM-201U-BL, standard double socket arm with small size locking knob, has a socket at both ends that accommodates 1.5"" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4""-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it."

"The RAM-202U-1525 contains a 1.5"" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1"" x 2"" center to center."

"The RAM-202U-IN1 consists of a 1.5"" diameter rubber ball connected to a steel reinforced post and flat 2.5"" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern."

The RAM-B-238-TO2U connects to the back of the factory cradle that is included with the purchase of the TomTom Rider. The screws that are included with the RAM-B-238-TO2U match up with the threads on the back of the RIDER cradle.