Showing 200–210 of 895 results

The U280-C02-S-M6 Dual USB Car Charger lets you quickly and safely charge two USB-powered mobile devices in your vehicle at the same time. You and your passenger can connect your cell phones simultaneously to ensure full charges when you reach your destination. Also ideal for tablets, MP3 players and other USB devices, the U280-C02-S-M6 features a built-in six-foot USB Micro-B cable with Quick Charge 2.0 technology for rapid charging of compliant devices. Available outputs include 5V 2A, 9V 1.67A and 12V 1.25A. The cable’s auto-sensing technology allows it to also charge devices without Quick Charge capability at a maximum power output of 5V 2.4A. The specially coiled cable takes up much less space than a regular six-foot cable.The U280-C02-S-M6’s USB port also features auto-sensing technology that detects the connected device and automatically adjusts to the appropriate power level up to 5V 2.4A, perfect for fast-charging tablets and e-readers. It’s also compatible with both Apple and Android, as well as other platforms.This ultra-compact charger works with any standard 12V DC vehicle power outlet. A front-facing LED indicates successful charging.Charge 2 Mobile Devices in Your Vehicle at the Same TimeIdeal for cell phones, tablets, e-readers and MP3 playersAuto-sensing USB port detects connected device and adjusts to proper power level up to 5V 2.4ACompatible with Apple, Android and other platformsWorks with any standard 12V DC vehicle power outletLED indicates successful chargingBuilt-In USB Micro-B Cable with Quick Charge 2.0Quick Charge 2.0 Class A 5/9/12V technologyQuick Charge 2.0 delivers up to 75% faster charging vs. conventional USB charging.Also charges non-QC devices at maximum power output of 5V 2.4ACoiled to take up less space than regular 6 ft. cable

2200VA line-interactive tower UPS system for server, networking and telecommunications equipment. Upright tower form factor. Offers sine wave 120V nominal output in both AC and battery modes. Switches to battery-derived AC output during power failures and extreme voltage variations. Line-interactive automatic voltage regulation (AVR) provides voltage boost/cut during brownouts/overvoltages to maintain regulated 120V nominal output over an input voltage range of 83-145V. Includes NEMA 5-20P input plug and 7 UPS-supported (6 x 5-15/20R & 1 L5-20R) output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all three network interfaces. Includes PowerAlert power management software and complete cabling. Three-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation, and battery warning LEDs. Audible alarm. Self-test. Field-replaceable, hot-swappable internal batteries. Attractive all-black color scheme.- SmartPro line-interactive UPS system is ideal for voice, data, medical and industrial networking applications- Line-interactive voltage regulation maintains selectable 120V nominal output during brownouts as low as 83V and overvoltages to 145V- Enables continuous operation through blackouts, voltage fluctuations and surges- Line-interactive automatic voltage regulation (AVR) provides 12% and 24% voltage boost during brownouts and a 12% voltage cut during overvoltages- Standard internal battery set offers 13 min. runtime at half load (800W) and 5 min. at full load (1600W)- Space-saving upright tower format- Network interfaces support simultaneous communications via built-in USB port, DB9 serial port and SNMPWEBCARD slot- HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X- Included PowerAlert power management software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP- UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, timed inverter shutoff, activate self-test and output power control- NEMA 5-20P input plug/6 x NEMA 5-15R and 1 x NEMA L5-20R output receptacles- Front panel LEDs provide current monitoring, voltage regulation, battery charge level, and battery warning information- UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required

- 2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS, Sine Wave- 120V output, Corrects brownouts and overvoltages from 83V to 145V- 0.9 Power Factor, Interactive LCD interface- Extended runtime options up to 1920W- 4 post compatible mounting accessories- 96% line-mode efficiency, 2 switched load banks- USB, RS232, EPO and network management card slot- 120V NEMA 5-20P input, 4 NEMA 5-15R & 4 NEMA 5-15/20R outletsTripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Communications interfaces support communications via USB, DB9 serial and slot for optional network management card options. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert monitoring software is available for free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.- Tripp Lite SM2200RMXL2UP line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W capacity and extended runtime options- Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V- NEMA 5-20P input plug; 4 NEMA 5-15/20R and 4 5-15R output receptacles, Two independently switched output load banks- Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages- High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions- Internal batteries offer 12 minutes at 50% load (960W) and 4.5 minutes at 100% load (1920W)- Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible), Supports 1920 watts in standalone or extended run configurations- External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)- Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment- Intelligent battery management system extends battery life- Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information- LCD interface also supports a number of advanced user setup and operating preferences- Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement- Built-in USB, DB9 and EPO (Emergency Power Off) interfaces- Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD- HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X- USB & DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert- Built-in Emergency Power Off (EPO) interface with cable

The U280-016-RM2U 16-Port USB Charging Station charges and syncs up to 16 tablets, smartphones and other USB-equipped devices at the same time. Recommended for schools, offices and other environments where multiple USB devices are used, this unit provides up to 5V, 2.4A (12W) of power to each port—plenty for charging battery-intensive devices like the iPad®, iPod®, iPhone® and Android® tablets and smartphones. LED indicators signal the ports in use.This 16-port charging station supports USB 2.0 data transfer rates up to 480 Mbps and is backward compatible with previous USB generations. To keep up with current technology, a mini-USB firmware port enables software upgrades that allow the charging station to support newer devices.In addition to charging, the U280-016-RM2U syncs any USB device using its compatible software—Apple® iTunes® or Apple Configurator, for instance. An included USB cable attaches to the unit’s USB-B port and the USB-A port on a computer for syncing purposes. The durable steel housing mounts in 2U of an EIA-standard 19-inch rack using the included hardware. It also includes four rubber mounting feet for installing the unit on a level surface that can sustain its weight and the weight of the connected cables. An included power cord connects to both the unit’s C14 rear inlet and a standard AC power outlet.

Tripp Lite OmniSmart Line Interactive UPS. Output power capacity: 0.7 kVA, Output power: 500 W, Surge energy rating: 510 J. Typical backup time at full load: 13 min, Typical backup time at half load: 31 min, Battery recharge time: 4.5 h. Form factor: Tower, Product color: Black, Cable length: 70.9" (1.8 m). Width: 7.5" (190.5 mm), Depth: 9.25" (235 mm), Height: 12.7" (323.8 mm). Master (outer) case width: 12" (304.8 mm), Master (outer) case length: 13.7" (349.2 mm), Master (outer) case height: 18.3" (463.6 mm)

The CSHANDLEKIT2 Mobile Cart Conversion Kit includes a reversible handle, rolling casters and a power cord manager that easily attach to your Tripp Lite 16-device AC or USB charging station, such as CSC16AC, CSC16ACW and CSC16USB. Perfect for schools, offices, warehouses, healthcare facilities and other locations where multiple tablets, laptops or Chromebooks are used regularly, the CSHANDLEKIT2 allows for smooth mobility of your charging station. The four rolling casters are non-marking for environments where this is mandatory. All four casters lock into place for maximum stability at rest. The casters, easy-grip handle and convenient power cord manager mount to the charging station using the included hardware. The CSHANDLEKIT2 supports a maximum load capacity of 158 kgs (350 lbs.) Converts Your 16-Device AC or USB Charging Station Into a Mobile Cart ● Adds reversible handle, rolling casters and power cord manager to CSC16AC, CSC16ACW, CSC16USB and other compatible charging stations ● Ideal for schools, offices, warehouses, healthcare facilities and other locations where multiple tablets, laptops or Chromebooks are used regularly ● Supports a maximum load capacity of 158 kg (350 lb.) ● 4 swivel/locking casters—all are non-marking ● Comes with all necessary installation hardware● Converts a 16-device charging station into a mobile cart ● Supports maximum load capacity of 350 lb. ● Includes reversible handle and power cord manager ● Includes 4 swivel/locking casters ● Comes with all necessary installation hardware Package Includes● Reversible handle ● Power cord manager ● (4) Non-marking casters, 4 in. ● (2) Caster-mounting brackets ● (2) Handle-mounting brackets ● (12) M5 screws ● (12) M5 locking washers ● (16) M6 screws ● (16) M6 locking washers ● (16) M6 flat washers ● Owner's manual

Tripp Lite SU20KRTHW 20,000VA / 20kVA / 18,000 watt online, double-conversion UPS system offers complete power protection for critical server, network and telecommunications equipment in a 12U rack/tower configuration. This system delivers complete N+1 redundancy when used at loads up to 10kVA, and non-redundant operation at loads between 10 and 20kVA. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included parallel PDU with manual bypass switching enables hot-swappable replacement of all major UPS system components in both N+1 and combined operating modes. Enhanced availability, fault tolerance and simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets and rugged industrial locations.Tripp Lite SU20KRTHW 20kVA, 20,000VA / 18,000 watt on-line, double-conversion UPS system in 12U total rack/tower configurationUnique configuration offers 20kVA non-redundant operation and automatic N+1 redundancy at load levels of 10kVA and underIncluded Parallel PDU with manual bypass switch enables hot-swap replacement power modules at any supported load levelHardwire input (3 wire) and hardwire output (3 wire) connectionsSupports North American (L1,L2,G) 208/240v hardwire input / output, plus International 230/220/240v (L,N,PE) hardwire input / outputOptional SU6000XFMR2U transformer offers 120v output in North American 208/240V (L1,L2,G) input configurationsMaintains full-time sine wave output within 2% of selectable 200/208/220/230/240V nominalSupports 50/60Hz operation for worldwide frequency compatibilityCompatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD, MODBUSCARD and RELAYIOCARD (NOTE: Applications utilizing any supported network management card option, require the installation of two of the same model network card – install one card per included UPS power module)Optional WEBCARDLX (sold separately) with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilitiesPADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurationsExpandable runtime with optional external battery packsSome external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)Battery independent restart ensures automatic UPS power-up after lengthy power outages, even with expired batteriesIntelligent battery management system with temperature-compensated charging extends battery lifeUSB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralertOptional 2POSTRMKITHD supports installation in 2 post 19 inch racks (4 required)Optional 2-9USTAND supports upright tower placement (2 required)Supports Emergency Power Off (EPO) via built-in interfaceFront panel LEDs and LCD readout with scroll controlsLED / LCD display panel rotates for viewing in rackmount or tower configurationsExternal battery packs are field replaceable and hot swappableFrequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating)

The SMC1000T SmartPro 120V 1kVA 650W Line-Interactive Sine Wave UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up high-performance workstations, servers and network equipment, the SMC1000T switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss. Pure sine wave output is compatible with active power factor correction (PFC) power supplies.Featuring eight NEMA 5-15R outlets and a six-foot power cord with NEMA 5-15P input, the SMC1000T has an internal battery that provides 14.4 minutes of support at half load and five minutes at full load. Two of the eight outlets provide surge protection only for printers and other non-essential devices. Front-panel LEDs indicate load level, power, voltage correction, site wiring fault and battery statuses.Automatic voltage regulation (AVR) maintains selectable 100V, 110V or 120V nominal output over an input range of 83V–121V (100V), 87V–133V (110V) or 95V–145V (120V) without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s free downloadable PowerAlert software, the SMC1000T enables safe unattended system shutdown and file saves in case of a prolonged power failure.Protects Mission-Critical Electronic Equipment- Provides fully regulated pure sine wave AC output compatible with active PFC power supplies- Audible alarm signals loss of utility power, overload and low battery- 8 NEMA 5-15R outlets—2 surge-only- 6 ft. power cord with NEMA 5-15P input- 570-joule surge suppression ratingReliable Battery Backup- Supports half load up to 14.4 min. and full load up to 5 min.- Internal batteries designed for hot-swap field replacement- 95% line-power efficiency rating saves money in energy costsAutomatic Voltage Regulation (AVR)- Maintains selectable nominal output without using battery power- Corrects brownouts and overvoltages from 83V–121V (100V), 87V–133V (110V) or 95V–145V (120V)EMI/RFI Line Noise Filtering- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performanceLED Indicators- Front-panel LEDs indicate load level, power, voltage correction, site wiring fault and battery statusesCommunications Ports- USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralertRJ45 Telephone/Ethernet Protection Jacks- Protect phone/DSL/fax/modem/Ethernet network against power surgesPackage Includes- SMC1000T SmartPro 120V 1kVA 650W Line-Interactive Sine Wave UPS- USB cable- Owner’s manual

The APSX6048VRNET 6000W APS X Series 48V DC 208/230V AC Inverter/Charger is a reliable power source for a wide variety of power tools, computers, audio/video components and other sensitive electronics at mobile, emergency and remote sites. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power. The DC-to-AC pure sine-wave inverter delivers clean power to sensitive electronics. Its automatic line-to-battery transfer switch and integrated charging system allow the unit to work as a vehicle inverter, standalone AC power source or extended-run UPS. It delivers 6000W of continuous power, 9000W up to one minute or 12000W of peak power up to 10 seconds during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage. Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment, the APSX6048VRNET converts stored power from a 48V battery or automotive DC source to safe, stable, computer-grade AC power for unlimited runtime in heavy-load conditions. When hardwired to an external 208V or 230V AC source, the unit keeps the user-supplied battery charged via a three-stage 23/90A selectable charging system while simultaneously delivering conditioned, pure sine-wave AC power to connected equipment. When used as a UPS, the APSX6048VRNET responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived, pure sine-wave AC power. The optional SNMPWEBSOLOHV accessory card enables remote monitoring of the unit via SNMP, SSH, Telnet, and Internet. Reliable Power for Mobile, Emergency and Remote Sites Generates 208/230V pure sine-wave power from 48V battery bank Ideal for powering variable-speed tools, computers, LEDs, fans, audio/video components and other sensitive electronics Designed for easy installation in RVs, fleet vehicles and emergency vehicles Functions as vehicle inverter, standalone AC power source or extended-run UPS Unlimited runtime with variety of user-supplied batteries Pure Sine-Wave Power for Normal and Peak Power Demands 6000W of continuous power 9000W of reserve power up to 1 min. 12000W of peak power up to 10 sec. to accommodate surge power demands during equipment startup and cycling Automatic overload detector, cooling fan and resettable AC circuit breaker protect unit from damage High-current DC input terminals for simple hardwired installation Automatic Voltage Regulation Corrects brownouts and overvoltages without using battery power during battery charging and UPS standby modes Remote Monitoring Capability DB9 port for optional SNMPWEBSOLOHV, which turns the unit into a monitored network device Enables network monitoring via SNMP, SSH, Telnet, or the Internet Automatic Transfer Switching Transfer relay switches to inverter power during blackout in 10 or 20 ms DIP switches configure high and low voltage auto-transfer 3-Stage 23/90A Selectable Battery Charger Serves as battery charger when external 208V or 230V AC power is supplied and powering connected equipment Protects battery from overcharging and overdischarging Low-battery protection prevents excessive battery depletion DIP switches configure wet/gel charging profiles Remote Generator Starter Jack Connects to separate generator with user-supplied cable to automatically cycle generator when battery level is low Rugged Steel Housing Resists moisture, vibration, impact and high-humidity environments

Tripp Lite SU16KRT-1TF 16,000VA / 16kVA / 14,400 watt online, double-conversion UPS system offers complete power protection for critical server, network and telecommunications equipment in a 14U rack/tower configuration. This system delivers complete N+1 redundancy when used at loads up to 8kVA, and non-redundant operation at loads between 8 and 16kVA. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included parallel PDU with manual bypass switching enables hot-swappable replacement of all major UPS system components in both N+1 and combined operating modes. Enhanced availability, fault tolerance and simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets and rugged industrial locations.- Tripp Lite SU16KRT 16kVA, 16,000VA / 14,400 watt on-line, double-conversion UPS system in 14U total rack/tower configuration- Unique configuration offers 16kVA non-redundant operation and automatic N+1 redundancy at load levels of 8kVA and under- Included Parallel PDU with manual bypass switch enables hot-swap replacement of power modules at any supported load level- Hardwire input; 2 L6-30R (208/240v), 8 C19 (208/240v), 8 5-15/20R (120v) and 4 5-15R (120v) outlets- Maintains full-time sine wave output within 2% of selectable 200/208/220/230/240V & 120V nominal- Expandable runtime with optional external battery packs- Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)- Battery independent restart- Highly efficient economy mode option- Optional SNMPWEBCARD, RELAYIOCARD and RELAYIOMINI interface modules available (RELAYIOMINI requires removal of USB interface module)- Applications utilizing the optional network communications card require two SNMPWEBCARD accessories (install one per included power module)- HID-compliant USB interface- Includes Free PowerAlert monitoring software; PowerAlert LOCAL, PowerAlert NSA and PowerAlert NMS for monitoring up to 250 SNMP-enabled UPS, PDU and other networking devices- Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks (6 required)- Optional 2-9USTAND supports upright tower placement (2 required)- Supports Emergency Power Off (EPO) via built-in interface- Front panel LEDs and LCD readout with scroll controls- LED / LCD display panel rotates for viewing in rackmount or tower configurations- External battery packs are field replaceable and hot swappable